Skip to content

News

Vape Starter Kit Troubleshooting: Fixes for Common Problems

by Tariq Limalia 11 Apr 2025 0 comments

Quick answer: Most starter kit problems come down to four things: a flat battery, a worn or poorly seated coil or pod, overfilling, or dirty contacts. Charge the device, reseat or replace the coil or pod, fill only to the line, and clean the contacts with a cotton bud. If a battery is swollen or the device gets very hot, stop using it.

Know the parts of your kit

  • Battery: powers the device.
  • Pod or tank: holds the e-liquid.
  • Coil: heats the e-liquid into vapour. In many pod kits the coil is built into the pod.
  • Mouthpiece: where you inhale.
  • Fire button or draw sensor: activates the coil.

Pod systems are compact and often draw-activated. Mod-style kits have adjustable wattage and sometimes removable batteries. Knowing which you have helps narrow down the problem.

No vapour

Likely causes

  • Flat battery or device switched off
  • Loose pod or coil connection
  • Faulty or burnt-out coil

Fixes

  • Charge fully. Some devices need several button clicks to switch on (often five).
  • Remove and reinsert the pod, or unscrew and refit the tank and coil.
  • Replace the coil or pod, for example XROS 3ml pods or Caliburn G3/G4 pods.

Burnt taste

Likely causes

  • Vaping with too little e-liquid (dry hits)
  • Not priming a new coil
  • Chain vaping, so the wick can't re-soak
  • Wattage set too high for the coil

Fixes

  • Prime new coils with a few drops of e-liquid on the exposed cotton, fill up, and wait about five minutes.
  • Take a few seconds between puffs and keep the pod topped up.
  • Keep wattage within the range printed on the coil.
  • If the burnt taste stays, the cotton is scorched: replace the coil.

Leaking or spitting

Likely causes

  • Overfilling the pod or tank
  • Worn or missing O-rings or seals
  • A loose or badly seated coil
  • A flooded coil, very thin e-liquid or wattage too low

Fixes

  • Fill only to the marked line and close the fill port firmly.
  • Check and replace cracked seals.
  • Make sure the coil is pushed or screwed fully in.
  • If gurgling, remove the pod, wrap it in tissue and give it a few sharp flicks to clear excess liquid.
  • Use an e-liquid suited to your device: nic salts or 50/50 in pods, high-VG in sub-ohm tanks.

Battery won't charge

  • Try a different USB-C cable and plug or port.
  • Gently clean the charging port of lint or e-liquid residue.
  • Check for leaked e-liquid in the pod bay; dry it before charging.
  • If the device is swollen, damaged or gets hot while charging, stop using it and bring it in to a shop. Do not try to repair it.

"No atomiser" or "check atomiser" message

This means the device can't detect the coil.

  • Remove and reinstall the coil or pod so it seats properly.
  • Clean the contacts with a dry cotton bud, or a little isopropyl alcohol, and let them dry.
  • Make sure the coil matches your device, such as Vaporesso GTi coils or VOOPOO PnP coils.
  • Try a new coil; faulty coils are a common cause.

Device getting too hot

A little warmth is normal. Excessive heat isn't.

  • Give the device a break from long or chain vaping sessions.
  • Lower the wattage to the coil's recommended range.
  • Open the airflow and clear blocked vents.
  • If it gets hot without being used, or smells of burning plastic, stop using it immediately.

Weak flavour or tight airflow

  • Replace an old coil or pod; flavour fades as coils age.
  • Set wattage within the coil's ideal range.
  • Clean the pod and mouthpiece to remove residue.
  • Open the airflow ring or slider, and check air holes for blockages.
  • Try the inhale style your device is designed for: mouth-to-lung (MTL) or direct-to-lung (DTL).

Habits that prevent problems

  • Read the manual for your kit.
  • Only use compatible pods, coils and chargers.
  • Prime every new coil.
  • Wipe the contacts and mouthpiece weekly.
  • Keep your kit out of hot cars and direct sun.

Still stuck? Pop into one of our stores and we'll take a look. Our guide to visiting a vape shop explains what to bring.

Frequently asked questions

Why does my new coil taste burnt straight away?

It was almost certainly not primed. The dry cotton scorches on the first puff and the coil usually needs replacing.

How often should I replace my pod or coil?

Typically every one to two weeks, sooner if you vape sweet e-liquids heavily. Replace it when flavour drops or it tastes burnt.

Why is my pod leaking into the device?

Usually overfilling, a loose fill cap, a worn seal or a flooded coil. Fill to the line and check the seals.

Is it safe to keep using a hot or swollen device?

No. Stop using it, don't charge it, and have it checked or replaced.

Vaping products are for adults 18+ only. Nicotine is addictive.

Prev post
Next post

Leave a comment

Please note, comments need to be approved before they are published.

Thanks for subscribing!

This email has been registered!

Shop the look

Choose options

Edit option
Back In Stock Notification
this is just a warning
Login
Shopping cart
0 items