Types of Vape Tanks Explained: RTA vs RDA vs RDTA
Quick answer: All three are rebuildable atomisers where you install your own coils and cotton. An RTA (rebuildable tank atomiser) has a build deck above or within a juice tank, so you can vape for a long time between refills. An RDA (rebuildable dripping atomiser) has no tank, so you drip e-liquid straight onto the cotton for punchy flavour. An RDTA puts the build deck on top of a tank below, with the wicks reaching down into the juice, giving you a mix of both.
RTA: rebuildable tank atomiser
An RTA combines a build deck with a glass tank of e-liquid. You build your coil, wick it with cotton, and the tank feeds juice to the wick as you vape. RTAs come in both mouth-to-lung (MTL) and direct-to-lung (DTL) styles.
- Pros: large capacity, portable, great flavour, and wide choice of MTL and DTL designs.
- Cons: wicking takes practice, and a poorly wicked RTA can leak or dry hit.
Popular choices include the GeekVape Zeus X Mesh RTA, Dovpo Blotto V1.5 26mm RTA and Vandy Vape Kylin V3 25mm RTA. If you prefer a tighter draw, see how to choose the best MTL RTA.
RDA: rebuildable dripping atomiser
An RDA, or dripper, has a build deck and a shallow juice well but no tank. You drip a few drops of e-liquid onto the cotton every few puffs. Many RDAs come with a bottom-feed (squonk) pin for use with a squonk mod, which pushes juice up from a bottle in the mod.
- Pros: intense flavour, easy to switch flavours, simple to build and wick.
- Cons: frequent dripping makes it less practical on the go.
RDTA: rebuildable dripping tank atomiser
An RDTA has an RDA-style deck sitting on top of a tank. The wick tails hang down into the e-liquid and draw it up to the coil. You get more capacity than an RDA with a deck that's often roomier and easier to build on than an RTA's. The IJOY Limitless RDTA is one example.
- Pros: spacious deck, good flavour, more capacity than a dripper.
- Cons: wick length matters, and some designs are less forgiving if tilted.
RTA vs RDA vs RDTA compared
| RTA | RDA | RDTA | |
|---|---|---|---|
| Juice storage | Tank | Small well only | Tank below deck |
| Refill frequency | Low | Every few puffs | Low to medium |
| Ease of building | Moderate | Easiest | Easy to moderate |
| Portability | High | Low (unless squonking) | Medium |
| Best for | All-day vaping | Flavour testing, squonking | Flavour with some capacity |
What you need to get started
- A compatible mod and a basic understanding of Ohm's law and battery safety.
- Coils: build your own or use Wotofo Prebuilt Coils.
- Cotton such as Cotton Bacon Prime.
- Basic tools: screwdriver, scissors and a coil jig.
New to building? Follow our step-by-step guide to building your first coil, and always check your build's resistance on a mod or ohm reader before firing.
Frequently asked questions
Which is best for beginners to rebuilding?
Many people find an RDA easiest to learn on because wicking is forgiving. For daily use, an RTA is more practical.
Do RTAs leak?
A correctly wicked RTA shouldn't leak. Too little cotton is the most common cause of leaking.
What's the difference between an RDTA and an RTA?
In an RDTA the deck sits on top of the tank and the wicks hang into the juice. In an RTA the deck is usually inside or below the tank section, with juice fed to the wick through ports.
Can I use an RDA without a squonk mod?
Yes. Just use the standard 510 pin and drip e-liquid onto the cotton by hand.
Vaping products are for adults 18+ only. Nicotine is addictive.


